TECH TIP
FORD TRUCK A/C INOPERATIVE WITH DTCS
Oct. 06 2020
Oct. 06 2020

Vehicle: 2002 Ford F150, 4WD, V8-5.4L SOHC, VIN L

Mileage: 165,802

Problem: This vehicle was brought to the shop because the A/C would not blow cold. The owner noticed that the A/C compressor would not engage.

Case Details: The technician tried jumping the A/C relay to get the compressor to engage but it would not. Next, he connected a scan tool and retrieved two diagnostic trouble codes (DTCs): 

B1261 – A/C Solar Radiation Sensor CKT Short To GND
P1460 – Wide Open Throttle A/C Cutout Primary Circuit Malfunction

Ford Truck AC Coil

At this point, he called ALLDATA Tech-Assist for some advice. The Tech-Assist consultant told him that, although the DTC B1261 could affect the air temperature calculation, it should not affect the compressor clutch operation. Together they went over the A/C system wiring diagram. The consultant suggested checking the circuit between the A/C clutch relay and the A/C clutch solenoid and advised paying close attention to lose or corroded pins that could cause an open circuit.

During a careful inspection of the wiring and connectors, the technician found that pin #1 (GY/WH wire) in connector C1110 for the A/C clutch solenoid had spread open and was loose. If he wiggled the wire in the connector, the A/C clutch would engage intermittently. (see diagram).

Confirmed Repair: The technician cleaned and tightened pin #1 and made sure the other pins in the connector were also clean and tight. After the repairs, the A/C system operated as designed. Fixed!

The ALLDATA Tech-Assist team fields cases like this every day. See how Tech-Assist can help your shop save time and money with on-call diagnostic support from ASE-certified Master Technicians. More Tech Tips 

Not an ALLDATA customer? For access to this valuable experience-based repair data and reliable OEM information, start a free trial today.

If you would like to read more articles like this one please subscribe to ALLDATA News.

Sign up for ALLDATA News